| 71918CDGB/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | d1 ≈:596 mm; da min.:557 mm; H:60 mm; Basic static load rating C0:1660 kN; D1 ≈:504 mm; Da max.:543 mm; Fatigue load limit Pu:26 kN; d:500 mm; r1,2 min.:2.1 mm; Reference speed:670 r/min; Minimum load factor A:14; D:600 mm; Basic dynamic load rating C:247 kN; ra max.:2 mm; Mass bearing (including seat washer where applicable):32 kg; Limiting speed:950 r/min; |
| 71818CD/P4DGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,15 Degree Contact Angle | Db2:57 mm; T:32.9 mm; J:76.5 mm; s1:15.9 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, inch G:0.375 in; Thread grub screw G2:#10-32 UNF; J7:11 mm; J6:61.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; Mass bearing unit:0.34 kg; N:11.5 mm; A1:11 mm; Basic static load rating C0:4.75 kN; A:26 mm; Limiting speed:9500 r/min; Da:50.8 mm; B4:4 mm; SWN:7 mm; H:98.5 mm; |
| 71916ACDGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,25 Degree Contact Angle | B:12 mm; d1:125 mm; Mass shaft washer:0.79 kg; r1,2 min.:1.1 mm; d:70 mm; |
| 71918CD/P4ATBTA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | Eye bolt:2 x 3/8-16 UNC; End plug (suffix Y):EPR 21; R1:104.775 mm; Cap bolt, SAE grade:8; h:47.625 mm; P180°:145 kN; P150°:120 kN; H1:169.875 mm; Stabilizing ring:2 x 38151-38; H2:66.675 mm; J max.:488.95 mm; ba:69.85 mm; A2:225.425 mm; da:173.037 mm; Cap bolt:7/8-9 UNC; R2:33.337 mm; A1:158.75 mm; Cap bolt recommended tightening torque:813.5 N·m; J min.:441.325 mm; Bearing limiting speed:2400 r/min; |
| 7019CD/P4ATBTA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | ra max.:8 mm; d2 ≈:1636 mm; B:335 mm; Fatigue load limit Pu:2400 kN; D:1950 mm; da max.:1633 mm; d:1500 mm; Da min.:1788 mm; Basic dynamic load rating C:19600 kN; da min.:1534 mm; Basic static load rating C0:48000 kN; Ca min.:9.3 mm; Da max.:1916 mm; D1 ≈:1831 mm; r1,2 min.:9.5 mm; Operating clearance factor k2:0.096; Mass bearing:2710 kg; Limiting speed:200 r/min; Reference speed:140 r/min; |
| 7219ACD/P4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,25 Degree Contact Angle | Mass:4.36 kg; s:3.9 mm; B1:67 mm; l1:40 mm; Purpose/ Application:Tillage; Minimum disc diameter min.:300 mm; d:39 mm; Corrosion protection:Zinc-coated housing; Recommended tightening torque for disc screws:100 N·m; Recommended minimum temperature min.:-20 °C; GF:M14x1.5; Maximum disc diameter max.:800 mm; Sealing system:SKF Mudblock seal; Shaft design:Shaft with metric fe; d1:34.9 mm; Recommended maximum temperature max.:50 °C; |
| 7217ACDGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,25 Degree Contact Angle | Housing:SAF 238; Eye bolt:2 x 1/2-13 UNC; P120°:107 kN; End plug (suffix Y):EPR 21; Pa:73.4 kN; Stabilizing ring:SR-38-32; Taconite seal (db shaft position):TER 171; J max.:619.125 mm; Mass pillow block:152 kg; P60°:290 kN; h:61.913 mm; S:4.763 mm; Cap bolt:4 x 7/8-9 UNC; H:401.637 mm; PG:1/4 NPT; Cap bolt, SAE grade:5; P90°:173 kN; Max. speed for Taconite seal:365 r/min; R1:120.65 mm; |
| 7018CDGB/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle | D:1090 mm; Basic dynamic load rating C:16000 kN; r1,2 min.:7.5 mm; D1 ≈:967 mm; Limiting speed:400 r/min; d2 ≈:779 mm; Da max.:1058 mm; Reference speed:300 r/min; ra max.:6 mm; s1 max.:37.2 mm; Basic static load rating C0:29000 kN; Da min.:920 mm; B:412 mm; Operating clearance factor k2:0.097; d:670 mm; Fatigue load limit Pu:1760 kN; Mass bearing:1545 kg; Ca min.:16.7 mm; |