| 71918ACDGA/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,25 Degree Contact Angle | Fatigue load limit Pu:22.4 kN; Basic static load rating C0:204 kN; r3,4 min.:1.5 mm; Ca min.:5 mm; Cb min.:5 mm; Calculation factor Y0:1; db min.:110 mm; da max.:110 mm; C:20 mm; D:140 mm; Da min.:131 mm; Limiting speed:4300 r/min; a:23.988 mm; Da max.:131 mm; Mass bearing:1.15 kg; B:25 mm; ra max.:1.5 mm; Dimension series:2CC; Db min.:135 mm; Reference speed:3400 r/min; |
| 7219ACD/P4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,25 Degree Contact Angle | Mass:4.36 kg; s:3.9 mm; B1:67 mm; l1:40 mm; Purpose/ Application:Tillage; Minimum disc diameter min.:300 mm; d:39 mm; Corrosion protection:Zinc-coated housing; Recommended tightening torque for disc screws:100 N·m; Recommended minimum temperature min.:-20 °C; GF:M14x1.5; Maximum disc diameter max.:800 mm; Sealing system:SKF Mudblock seal; Shaft design:Shaft with metric fe; d1:34.9 mm; Recommended maximum temperature max.:50 °C; |
| 71915CD/P4ADGB SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | H1:57.2 mm; L:203 mm; A5:29.5 mm; A:54 mm; A1:34 mm; d:49.212 mm; Mass bearing unit:2.65 kg; J:157 mm; s1:27.5 mm; Limiting speed:800 r/min; Basic dynamic load rating C:35.1 kN; B1:46 mm; N:26 mm; Hexagonal key size for grub screw N:3 mm; Recommended diameter for attachment bolts, inch G:0.625 in; Recommended diameter for attachment bolts, mm G:16 mm; J6:187 mm; H2:22 mm; J min.:149 mm; Basic static load rating C0:23.2 kN; |
| 71815CDGB/P4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,15 Degree Contact Angle | h:50.8 mm; ba:65.088 mm; Max. speed for Taconite seal:590 r/min; P150°:136 kN; PG:1/4 NPT; RG:3/4 NPT; da:131.762 mm; R2:39.688 mm; P90°:236 kN; Cap bolt recommended tightening torque:813.5 N·m; Da:269.999 mm; S:4.763 mm; Ca:82.804 mm; Mass pillow block:117 kg; Eye bolt:2 x 3/8-16 UNC; Cap bolt, SAE grade:8; End plug (suffix Y):EPR 16; L:539.75 mm; Pa:32.7 kN; P180°:162 kN; |
| 7219CDGB/P4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,15 Degree Contact Angle | d:300 mm; G:299.339 mm; Mass adapter sleeve assembly:31 kg; d3 max.:360.502 mm; Hydraulic nut:HMVC 60E; d1:277.813 mm; B:39.954 mm; Threads per inch:6; B5:49.479 mm; Sleeve:S 3260x10.15/16; B1:244.602 mm; |
| 7215ACD/P4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7200 Series,25 Degree Contact Angle | Fw:60 mm; Basic static load rating C0:150 kN; Mass needle roller and cage assembly:0.12 kg; U:40 mm; Ew:66 mm; Limiting speed:8000 r/min; Reference speed:7000 r/min; Basic dynamic load rating C:55 kN; Fatigue load limit Pu:18.6 kN; |
| 71818CD/P4DGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,15 Degree Contact Angle | Db2:57 mm; T:32.9 mm; J:76.5 mm; s1:15.9 mm; RG:1/4-28 UNF; Recommended diameter for attachment bolts, inch G:0.375 in; Thread grub screw G2:#10-32 UNF; J7:11 mm; J6:61.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; Mass bearing unit:0.34 kg; N:11.5 mm; A1:11 mm; Basic static load rating C0:4.75 kN; A:26 mm; Limiting speed:9500 r/min; Da:50.8 mm; B4:4 mm; SWN:7 mm; H:98.5 mm; |
| 71914CD/P4ADGA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle | s1:25.4 mm; A1:13 mm; Da:88.9 mm; SWN:7 mm; J:130 mm; Limiting speed:5300 r/min; B4:6 mm; N4:2 mm; J7:15 mm; Db1:88 mm; Db2:96 mm; Housing material:Cast iron; T:46.4 mm; Rα:45 °; GN:1/4-28 SAE-LT; R1:22 mm; B:42.9 mm; RG:1/4-28 UNF; Basic static load rating C0:15.3 kN; A3:3.2 mm; |