| 577796 Thrust Roller Bearings | C:41,27 mm; Bore Diameter (mm):254; r max:4 mm; B:41,27 mm; E:322 mm; d:254 mm; Outer Diameter (mm):322; F:269 mm; Bearing number:100RIF433; D:336,55 mm; |
| FCD8011241 Tapered Roller Bearing Assemblies | Static load rating axial (C0):98 kN; D1:52,1 mm; C2:9 mm; D:47 mm; da:47,7 mm; Bore Diameter (mm):35; Size (mm):35x47x30; Width (mm):30; Weight:0,165 Kg; C:30 mm; Static load rating radial (C0):40 kN; D2:53,2 mm; Dynamic load rating axial (C):38 kN; Bearing number:NKXR 35 Z; d:35 mm; Outer Diameter (mm):47; Dynamic load rating radial (C):23,5 kN; C1:12 mm; Fw:35 mm; |
| HM261049DW Tapered Roller Bearings | Bearing number:K15×21×21; Outer Diameter (mm):21; Basic dynamic load rating (C):16,5 kN; Basic static load rating (C0):19,1 kN; (Grease) Lubrication Speed:15000 r/min; Bc:21 mm; Bore Diameter (mm):15; Fw:15 mm; Weight:0.0170 Kg; Ew:21 mm; |
| 531814 Plain Bearings | overall length:169.9 mm; maximum rpm:3500 RPM; rod hole diameter:25.4 mm; unit type:Side Mount; slot width:7.95 mm; locking device:Set Screw; overall height:146.1 mm; finish/coating:Uncoated; d:55 mm; series:212; dynamic load capacity:52470 lb; manufacturer catalog number:125986; slot spacing:124.89 mm; seal type:Contact with Flinger; lubrication type:Lubrication Fitting; expansion type:Non-Expansion Bearin; |
| 22240 E1A-MB1-C3 Needle Self Aligning Roller Bearings | Material:Steel shell with PTF; Bore Diameter (mm):16; Bearing Length, Nominal (B):17.000; Shaft Size (ds) - 16 -0.016 / -0.034:16 0.016 / 0.034; Flange Radius (rfl):1.000; Shaft Dia., Nominal (d):16.0000; Bearing Type:flanged; ID Chamfer Angle (B deg.):30; Wall Thickness (S3):1.005; OD Chamfer Length (Co):0.600; Bearing Outside Diameter, Nominal(Do):18.000; Bearing number:AST40 F16170; Average Clearance (Cd):0.0490; |
| 207716 Thrust Roller Bearing | (Grease) Lubrication Speed:19000 r/min; Nlim (grease):19,000 rpm; Characteristic inner ring frequency, BPFI:6.78 Hz; Product Group:B04144; Mass:0.01 kg; rs min:0.3 mm; Basic static load rating (C0):5,1 kN; Precision class:P0; Category:Roller Bearings; Lw:7.8 mm; C:12 mm; Lubrication hole on outer ring:Non/No; Cr:4.55 kN; Da max.:11,5 mm; Outer Diameter (mm):17; Characteristic outer ring frequency, BPF0:5.22 Hz; |
| 54FC7623 Spherical Roller Bearings | mounting type:Three-Bolt Bracket S; bore type:Round; bolt size:1/2; hub diameter:3-3/4 in; radial static load capacity:3460 lbf; series:UEFB200NPMZ20RF; seal type:Dual Lip with Slinge; horizontal bolt spacing:2 in; locking device:Accu-Loc; radial dynamic load capacity:5820 lbf; housing material:Cast Iron - Nickel P; shaft centerline height:2-3/8 in; vertical bolt spacing:1-1/4 in; |
| T511 Needle Self Aligning Roller Bearings | outer ring width:0.7480 in; D:2.8346 in; series:G-KLL; d:1.4375 in; finish/coating:Uncoated; cage material:Steel; maximum rpm:5610 RPM; inner ring width:1.4844 in; bore type:Round; snap ring included:Without Snap Ring; B:1-31/64 in; |
| No. | Brand | S | E | L | F | h | k | R | A |
| H247549/H247510CD | - | - | - | - | - | - | - | - | - |
| 67790DW/67720/67721D | - | - | - | - | - | - | - | - | - |
| 67790/67720CD | - | - | - | - | - | - | - | - | - |
| T16021 | - | - | - | - | - | - | - | - | - |
| M 255449 D/410/410 D | - | - | - | - | - | - | - | - | - |
| H961649/10D | - | - | - | - | - | - | - | - | - |
| M255449 | - | - | - | - | - | - | - | - | - |
| T611 | - | - | - | - | - | - | - | - | - |
| T-611 | - | - | - | - | - | - | - | - | - |
| 294/5 | - | - | - | - | - | - | - | - | - |
| T811 XA | - | - | - | - | - | - | - | - | - |
| 74472 / 74851 CD / X1S-74472 | - | - | - | - | - | - | - | - | - |
| 1097988 (351988 | - | - | - | - | - | - | - | - | - |
| 47TS483434-1WSGFCS15 | - | - | - | - | - | - | - | - | - |
| HM261049 | - | - | - | - | - | - | - | - | - |
| 23168 CCK/W33+OH 3168H | - | - | - | - | - | - | - | - | - |
| 29432 E | - | - | - | - | - | - | - | - | - |
| 35198 | - | - | - | - | - | - | - | - | - |
| 67885DW, 67820,67820CD | - | - | - | - | - | - | - | - | - |
| EE231400/231976D | - | - | - | - | - | - | - | - | - |
| 7502724M | - | - | - | - | - | - | - | - | - |
| T1452 | - | - | - | - | - | - | - | - | - |
LM272235/LM27221 Cam Follower And Track Roller Video
Roller bearings:Thrust roller bearings|Products by Type
Cylindrical roller thrust bearings. Photo: Cylindrical roller thrust bearings. These bearings use cylindrical rollers and have single-row, double-
Thrust bearing - Wikipedia
A thrust bearing is a particular type of rotary bearing. Like other bearings they permit rotation between parts, but they are designed to support a predominantly
Thrust Roller Bearings | Roller Bearings | Products | NSK Global
Available with cylindrical or spherical rollers, NSK's thrust roller bearings sustain only axial loads, but they are suitable for heavy loads and have high axial
Thrust Roller Bearings - NSK Europe
NSK Thrust Roller Bearings are available with cylindrical or spherical rollers. These bearings sustain only axial loads, but have high axial rigidity and are
Thrust Roller Bearings - NSK Americas
NSK Thrust Roller Bearings are available with cylindrical or spherical rollers. Thrust bearings sustain only axial loads, but have high axial rigidity which are
Thrust Bearings (Ball) | American Roller Bearing
Thrust bearings are designed to accommodate axial load in one or both directions. The single acting carries the load in one direction while the double acting can
Thrust Roller Bearings | KG International FZCO
A thrust bearing is a particular type of rotary bearing. Like other bearings, they permit rotation between parts, but they are designed to support a predominantly
Thrust Bearings | The Timken Company
Tapered Roller. Tapered thrust-type bearings are engineered for true rolling motion, which offers increased bearing life and additional load-bearing capacity
Cylindrical roller thrust bearings | SKF
SKF cylindrical roller thrust bearings are designed to accommodate heavy axial loads and impact loads. They must not be subjected to any radial load
Tapered roller thrust bearings | SKF
SKF tapered roller thrust bearings are designed to accommodate heavy axial loads and peak loads. The bearings are very stiff and require little axial space