| M241547/M241513XD Tapered Roller Bearings | static load capacity:19800 N; series:22; cage material:Polyamide; internal clearance:C3; d:80 mm; closure type:Open; dynamic load capacity:49500 N; maximum misalignment:4 °; D:140 mm; outer ring width:33 mm; B:33 mm; fillet radius:2 mm; standards met:DIN 630; precision rating:Not Rated; bore type:Tapered 1:12; finish/coating:Uncoated; maximum rpm:5000 RPM; operating temperature range:Maximum of +120; |
| 207716 Thrust Roller Bearing | (Grease) Lubrication Speed:19000 r/min; Nlim (grease):19,000 rpm; Characteristic inner ring frequency, BPFI:6.78 Hz; Product Group:B04144; Mass:0.01 kg; rs min:0.3 mm; Basic static load rating (C0):5,1 kN; Precision class:P0; Category:Roller Bearings; Lw:7.8 mm; C:12 mm; Lubrication hole on outer ring:Non/No; Cr:4.55 kN; Da max.:11,5 mm; Outer Diameter (mm):17; Characteristic outer ring frequency, BPF0:5.22 Hz; |
| LM121948DW Needle Aircraft Roller Bearings | series:UCF200NPMZ2; replacement bearing:UC203MZ2; length through bore:31 mm; housing material:Cast Iron - Nickel P; lubrication type:Lubrication Fitting; radial static load capacity:680 kgf; bore type:Round; mounting type:Four-Bolt Flange; radial dynamic load capacity:1310 kgf; duty type:Standard Duty; expansion type:Non-Expansion Bearin; D:64 mm; locking device:Set Screw; seal type:Contact with Flinger; |
| 577796 Thrust Roller Bearings | C:41,27 mm; Bore Diameter (mm):254; r max:4 mm; B:41,27 mm; E:322 mm; d:254 mm; Outer Diameter (mm):322; F:269 mm; Bearing number:100RIF433; D:336,55 mm; |
| BT2B 332506/HAZ Spherical Roller Bearings | housing material:Cast Iron - Teflon P; radial static load capacity:1080 lbf; B:7.4375 in; series:UCFT200TCMZ2; d:1.9375 in; locking device:Set Screw; lubrication type:Lubrication Fitting; bore type:Round; seal type:Contact with Flinger; length through bore:0.866 in; mounting type:Two-Bolt Flange; radial dynamic load capacity:2150 lbf; D:6.1875 in; duty type:Standard Duty; replacement bearing:UC210-31MZ2; |
| HM265049ZD/010/010D Tapered Roller Bearing Assemblies | a:7,4 mm; D:105 mm; C:29 mm; Bearing number:JHM807045/12; Width (mm):37; d:50 mm; Outer Diameter (mm):105; Size (mm):50x105x37; B:36 mm; Bore Diameter (mm):50; T:37 mm; |
| 22240 E1A-MB1-C3 Needle Self Aligning Roller Bearings | Material:Steel shell with PTF; Bore Diameter (mm):16; Bearing Length, Nominal (B):17.000; Shaft Size (ds) - 16 -0.016 / -0.034:16 0.016 / 0.034; Flange Radius (rfl):1.000; Shaft Dia., Nominal (d):16.0000; Bearing Type:flanged; ID Chamfer Angle (B deg.):30; Wall Thickness (S3):1.005; OD Chamfer Length (Co):0.600; Bearing Outside Diameter, Nominal(Do):18.000; Bearing number:AST40 F16170; Average Clearance (Cd):0.0490; |
| 93825/93127CD Cylindrical Roller Bearings | C:14,3 mm; Outer Diameter (mm):40; B:13,67 mm; d:17 mm; Bearing number:203KT; D:40 mm; Bore Diameter (mm):17; Weight:0,077 Kg; Width (mm):13,67; Size (mm):17x40x13.67; Basic dynamic load rating (C):10,9 kN; |
| No. | Brand | S | E | L | F | h | k | R | A |
| T52 | - | - | - | - | - | 20 mm | - | - | 9 mm |
| 294/850EF | - | - | - | - | - | - | - | - | - |
| LM241149NW/LM241110D | - | - | - | - | - | - | - | - | - |
| M 255449 D/410/410 D | - | - | - | - | - | - | - | - | - |
| FCDP150216715/HC/C4 | - | - | - | - | - | - | - | - | - |
| T691 | - | - | - | - | - | - | - | - | - |
| LM 761649 DW/610/610 D | - | - | - | - | - | - | - | - | - |
| HM265049TD/1 | - | - | - | - | - | - | - | - | - |
| M268749 | - | - | - | - | - | - | - | - | - |
| T7519 | - | - | - | - | - | - | - | - | - |
| T451 | - | - | - | - | - | - | - | - | - |
| L357049NW/L357010 C.D | - | - | - | - | - | - | - | - | - |
| 545991/Y | - | - | - | - | - | - | - | - | - |
| NU2348-EX-M1A-C3 | - | - | - | - | - | - | - | - | - |
| 305264D | - | - | - | - | - | - | - | - | - |
| 3004244 | - | - | - | - | - | - | - | - | - |
| 74472 / 74851 CD / X1S-74472 | - | - | - | - | - | - | - | - | - |
| 531814 | - | - | - | - | - | - | - | - | - |
| NCF 18/800 V | - | - | - | - | - | - | - | - | - |
| 577796 | - | - | 322 mm | - | 269 mm | - | - | - | - |
| M 270449 DW/410/410 D | - | - | - | - | - | - | - | - | - |
| 2687/1049 | - | - | - | - | - | - | - | - | - |
| HM262749DW/710/710D | - | - | 231 mm | - | 159 mm | - | - | - | - |
| HJ326S1 | - | - | - | - | - | - | - | - | - |
| 531817 | - | - | - | - | - | - | - | - | - |
| M257248DW/210/210D | - | - | - | - | - | - | - | - | - |
| HH924349V1/HH924310D | - | - | - | - | - | - | - | - | - |
| NUP198 | - | - | - | - | - | - | - | - | - |
| LM121948DW | - | - | - | - | - | - | - | - | - |
T7519 Needle Self Aligning Roller Bearings Video
Thrust Bearings (Ball) | American Roller Bearing
Thrust bearings are designed to accommodate axial load in one or both directions. The single acting carries the load in one direction while the double acting can
Roller bearings:Thrust roller bearings|Products by Type
Cylindrical roller thrust bearings. Photo: Cylindrical roller thrust bearings. These bearings use cylindrical rollers and have single-row, double-
Tapered roller thrust bearings | SKF
SKF tapered roller thrust bearings are designed to accommodate heavy axial loads and peak loads. The bearings are very stiff and require little axial space
Thrust Bearings | The Timken Company
Tapered Roller. Tapered thrust-type bearings are engineered for true rolling motion, which offers increased bearing life and additional load-bearing capacity
Cylindrical roller thrust bearings | SKF
SKF cylindrical roller thrust bearings are designed to accommodate heavy axial loads and impact loads. They must not be subjected to any radial load
Thrust Roller Bearings - NSK Americas
NSK Thrust Roller Bearings are available with cylindrical or spherical rollers. Thrust bearings sustain only axial loads, but have high axial rigidity which are
Thrust bearing - Wikipedia
A thrust bearing is a particular type of rotary bearing. Like other bearings they permit rotation between parts, but they are designed to support a predominantly
Thrust Roller Bearings - NSK Europe
NSK Thrust Roller Bearings are available with cylindrical or spherical rollers. These bearings sustain only axial loads, but have high axial rigidity and are
Thrust Roller Bearings | KG International FZCO
A thrust bearing is a particular type of rotary bearing. Like other bearings, they permit rotation between parts, but they are designed to support a predominantly
Thrust Roller Bearings | Roller Bearings | Products | NSK Global
Available with cylindrical or spherical rollers, NSK's thrust roller bearings sustain only axial loads, but they are suitable for heavy loads and have high axial